Sealcoating Applications
All Services
Get Free Quote
Yes, we offer free estimates for all potential projects. Contact us to schedule a consultation.

Asphalt Sealcoating Services in Upstate SC
Asphalt is a tough material, but it is not immune to the elements. Without protection, constant exposure to sunlight, heavy rain, and vehicle fluids will break down the binder that holds your pavement together. At Pave The Upstate, we apply commercial-grade sealcoating to driveways and parking lots throughout South Carolina to stop this deterioration. Sealcoating acts as a wearable shield, blocking harmful UV rays and preventing water from soaking into the porous surface. When asphalt turns gray and brittle, it is actively losing its flexibility. Our sealing process locks in the essential oils, restoring that deep black finish and adding years to the lifespan of your pavement.
The weather in Upstate SC accelerates pavement wear if left untreated. High summer temperatures bake the surface, while heavy seasonal rains exploit any small cracks to wash out the dirt base beneath. By keeping a fresh sealcoat on your asphalt every two to three years, you prevent these natural forces from causing expensive structural failure. A proactive approach costs a fraction of what you would spend on asphalt patching, resurfacing, or a complete tear-out. We use high-solids sealer mixes designed to handle daily tire friction, meaning your property looks clean and remains protected through changing seasons.
The Application Process
Surface Cleaning and Preparation
You cannot apply a liquid sealer over dirt, leaves, or loose gravel and expect it to stick. The first and most important step of our job is thoroughly cleaning the entire asphalt surface. Our crews use industrial wire brooms, high-powered walk-behind blowers, and pressure washing when necessary to strip away dirt and debris. We clear out the edges along grass lines and curbs so the sealer reaches every inch of the pavement. Skipping this step leads to peeling and flaking, which is why we spend a large portion of our time on site just preparing the ground before any liquid is poured.
Crack Sealing and Oil Spot Treatment
Sealcoating alone will not fix existing damage or bridge wide gaps in the pavement. Before we apply the main coat, we have to treat the vulnerable areas. Vehicle fluids like motor oil, gas, and antifreeze eat directly through asphalt. We scrub these stains and apply a specialized primer so the new sealer will properly adhere over them. Next, we clean out structural cracks and fill them with a hot-pour rubberized crack sealant. This step blocks water from traveling down into the dirt base layer, stopping the freeze-thaw cycle that creates massive potholes during the winter months.
Applying the Protective Coat
Once the lot or driveway is clean and repaired, we apply the asphalt sealer. Depending on the size and layout of the project, we use mechanical spray units or manual squeegees to lay down a smooth, even layer of material. We do not thin out our mixes with excessive water just to stretch the product. You get a thick, durable wearing course that dries to a tough finish. After the application, we barricade the area with tape and cones, giving the material the time it needs to cure completely before you drive or park on it again.
Why Sealcoat Your Pavement?
Leaving your asphalt bare exposes it to constant damage from weather and traffic. Over time, the surface oxidizes, loses its flexibility, and begins to crack under the weight of cars and trucks. Applying a fresh sealcoat provides a waterproof barrier that resists gas and oil spills while stopping sun damage in its tracks. Beyond the physical protection, a newly sealed parking lot or driveway instantly improves the appearance of your property. The dark black surface creates a sharp contrast with your landscaping and pavement striping, giving homes a clean look and showing customers that a business is well-managed.
